Now available from the Tungaloy Corporation is the exciting new PSF &
PSS range of turning inserts
for medium to finish machining of steel and stainless steels.
The new positive geometry inserts incorporate a well balanced chipbreaker
to provide remarkable tool life, chip control and surface finishes on a variety of turning applications.
For finish machining processes, the PSF series of inserts have a steep protrusion
that guarantees a consistent curl diameter of the chips to
improve the removal of swarf from the cutting area.
The PSF inserts also incorporate an innovative two-step rake angle
that reduces the contact area on the rake face.
This combination delivers exceptional chip control that reduces the cutting forces
and offers surface finishes way beyond that of competitor products.
The PSF series operates at a depth of cut from 0.1 to 0.5 mm with a feed rate of 0.05 to 0.3 mm/rev.
The new PSS series of inserts for medium to semi finishing processes
have an arc shaped protrusion to
improve chip flow and enhance tool life while an inclination
on the cutting edge stabilises the cutting performance with low cutting forces.
The PSS range of inserts has an extremely sharp cutting edge
that prevents swarf adhesion and improves tool life.
This optimum insert geometry has a smothered protrusion that further reduces cutting forces.
The extremely low cutting forces enable
the PSS to machine at a depth of cut from 0.3 to 2 mm with a feed rate from 0.08 to 0.3 mm/rev.
Initially available with Tungaloy’s AH725 insert grade.The AH725 grade is produced
from micro grain carbide that improves wear resistance and toughness
to prevent plastic deformation, fracturing and chipping.
Attached to this micro grain carbide is a TiAlN super flash coating
that adds to the hardness and toughness of the cutting edge.
The combination of superior wear and impact resistant PVD coating
material "AH725" and new surface technology "PremiumTec" can stably
realize long tool life in machining steel and stainless steel.
Total 90 items (PSF 43 items / PSS 47 items)
PDF(1.6MB)
|
